TurboKlone T24 Humidity Dome, Vented Cover for the T24 Cloner

TurboKlone T24 Humidity Dome: Moisture Where Cuttings Need It

This dome is the cover TurboKlone builds for its T24, the 24-site cloner with a built-in fan. It sits on the T24 lid and closes the space above the cuttings. A fresh cutting has leaves but no roots, so it loses water faster than it can draw it in. Trapping humid air around those leaves slows that loss while roots form below. TurboKlone gives about 60% humidity as the optimal range inside the dome. The company recommends adding the dome in drier climates, where room air pulls moisture out of soft leaves quickly. TurboKlone calls this a vented dome, so humidity can be lowered without lifting the cover. With the dome fitted, the T24 stands 17 in tall assembled. Without it, the cloner stands 11.5 in, so plan shelf clearance for the extra height. The dome matches the T24 footprint, so no adapters or extra parts are needed. It also serves as a replacement when an original dome cracks or goes missing. A T24 bought without a dome can take this one later.

Using a Cloning Dome Through a T24 Run

Load every collar and check the spray before the dome goes on. Set it over the lid so it rests evenly on all sides. For the first few days, keep the vent mostly closed to hold moisture high. Look for droplets on the inside of the dome as a quick sign that the air is humid. Heavy condensation that drips onto leaves suggests the vent should open a little. As roots appear below the collars, open the vent wider over several days. That step lets cuttings adjust to room air before they leave the cloner. Removing the dome all at once can make tender leaves droop. Keep a low-output light above the dome for the length of the run. Wipe the inside of the dome between runs to clear residue and any mold spores. A dome that stays clean also stays easier to see through. Store it upright or nested so the walls do not warp.

Key Features

• Built for the T24: Matches the footprint of TurboKlone's 24-site cloner.
• Vented cover: Lets you lower humidity without lifting the dome.
• Humidity target: TurboKlone lists about 60% as the optimal range.
• Dry-room support: Recommended by TurboKlone for drier climates.
• Replacement or add-on: Fits a T24 bought without a dome or replaces a damaged one.

Technical Specifications