
Gard'n Clean GC-30 Liquid Chlorine Dioxide
GC-30 Liquid is a dry sachet that generates pure chlorine dioxide (ClO2) when it soaks in water. Drop one envelope into 6 gallons of water inside a closed container and it produces a 500 ppm stock solution. Dilute that stock and the same sachet covers 30 gallons at 100 ppm, the working strength for room and surface disinfection. Activation takes at least two hours, and the envelope comes out once the reaction is complete. The product carries EPA Registration No. 74986-5 and is OMRI listed for organic production. It also appears on the EPA's List N of disinfectants. Chlorine dioxide kills by oxidation, breaking down cell walls rather than poisoning a target site. That mechanical action means pathogens do not build resistance to it over repeated use. Gard'n Clean lists Fusarium, Pythium, Botrytis, powdery and downy mildew, tobacco mosaic virus and hop latent viroid among its targets. Treated surfaces need no rinse after the contact time. The gas form lets the solution reach into crevices, drip emitters and biofilm that wipes miss.
Mixing a Chlorine Dioxide Disinfectant for the Grow Room
Pick a sealed, opaque container large enough for the batch and fill it with clean water first. Set it somewhere ventilated, out of light, while the sachet activates. During generation, wear eye protection, gloves and an organic vapor or acid gas respirator. Once the stock is made, it holds strength for up to 60 days in that sealed container. Between crop cycles, flush irrigation lines at about 50 ppm and let the solution sit for four to twelve hours. That soak loosens biofilm and clears slime from emitters before the next crop goes in. For pruners, trays and cutting tools, 25 to 50 ppm replaces a bleach dip without the harsh residue. Routine wipe-downs of benches and walls run lower, around 10 to 25 ppm. Diluted to 5 ppm, it works as a produce wash. In nutrient tanks and feed lines, a steady dose of 0.25 to 1 ppm keeps water clean through the run. Turn off HVAC and grow lights while fogging or spraying a room, since light breaks down chlorine dioxide. Confirm every working strength with wide range or low range test strips before use. The sell sheet, SOP and technical bulletin are attached with full dilution tables.
Key Features
- Dry Sachet Format: One envelope makes a 500 ppm stock in 6 gallons, or 30 gallons at 100 ppm.
- EPA Registered: Registration 74986-5, and listed on the EPA List N of disinfectants.
- OMRI Listed: Approved for organic production.
- Broad Pathogen Range: Labeled against fungi, bacteria, algae and plant viruses including TMV and HLVd.
- No Resistance: Oxidation kills by breaking cell walls, so pathogens do not adapt.
- No Rinse Needed: Treated surfaces and tools go back into use after the contact time.
Technical Specifications
| Specification | Value |
|---|---|
| Brand | Gard'n Clean |
| Product | GC 30 |
| Item number | GC-30G-CASE |
| Active | Chlorine dioxide (ClO2), generated in water |
| Format | Dry sachet (envelope) |
| Yield per sachet | 6 gal (24 L) at 500 ppm, or 30 gal at 100 ppm |
| Activation | At least 2 hours in a closed container |
| Stock stability | Up to 60 days sealed in an opaque container |
| Disinfection rate | 100 to 200 ppm |
| Irrigation line cleaning | 50 ppm, 4 to 12 hour hold |
| Tools and bleach replacement | 25 to 50 ppm |
| Surface cleaning | 10 to 25 ppm |
| Produce wash | 5 ppm |
| Continuous water treatment | 0.25 to 1 ppm |
| EPA Registration No. | 74986-5 |
| EPA Establishment No. | 071441-OH-004 |
| Organic | OMRI listed |
| Testing | Selective Micro wide range and low range test strips |