Bubble Magic 120 Micron Shaker Kit

Bubble Magic 120 Micron Shaker Kit for Dry Ice Sifting

This kit is a two-piece dry ice extraction setup: a rigid bucket and a shaker bag cut to fit it exactly. The bag body is waterproof neoprene with a built-in 120 micron mesh screen and two attached handles. Neoprene holds up to the cold of dry ice and keeps your hands off the frozen bucket wall while you shake. A 120 micron screen is a mid-grade mesh, so resin heads pass quickly and coarse leaf stays behind. It is the higher-flow grade, suited to heavier material such as trim and sugar leaf. The workflow takes only minutes. Load frozen material and dry ice into the bucket, let them chill together for a couple of minutes, then stretch the bag over the rim. Turn the bucket upside down over a clean, flat surface and shake hard for about three to four minutes. Trichomes break off the frozen plant and fall through the screen onto a mirror, glass sheet or parchment, ready to scrape up with a card. A common starting ratio is roughly two ounces of dry ice per ounce of plant material, adjusted by how cold and brittle the batch stays. The packed kit measures 8 x 8 x 10.5 in and weighs about 1.9 lb, so it stores easily next to the freezer. This setup is made for dry ice only, not for ice water washing.

A Dry Ice Hash Kit That Sets Up in Minutes

Small-batch processors reach for this kit to sift trim without filling tubs, pumping water or waiting days for a wet product to dry. Because the material never gets wet, the collected resin can go straight to a press or into storage the same day. The mid-grade screen is forgiving for a first run and still clean enough for pressing. Shake time decides quality as much as the micron rating does. The first minute pulls the most mature heads, while longer runs bring green fines through. Many growers collect in short rounds and keep the first pull separate. Keep the material as cold as possible, since warm trim smears resin instead of snapping it loose. Handle dry ice with insulated gloves and work in a ventilated room, because it releases carbon dioxide as it sublimates. Bubble Magic shaker bags in other micron grades fit this bucket, so the same bucket can run several grades over time. Rinse the neoprene bag with warm water after use and let it dry fully before storage so the screen stays clear. For anyone pressing rosin from dry sift, this bucket-and-bag pair keeps the whole process on one tabletop.

Key Features

• 120 micron screen: A mid-grade mesh passes resin heads quickly and holds back most leaf and stem fragments.
• Custom-fit bucket: The bag stretches tight over the rim, so nothing escapes around the edge while you shake upside down.
• Waterproof neoprene bag: The body insulates against dry ice cold and wipes clean after each run.
• Attached handles: Two handles give leverage and grip for hard shaking with gloved hands.
• Dry ice process: No water, no drying time, and the collected sift is ready for pressing or storage the same day.
• Compact kit: The packed kit fits on a shelf next to the freezer between runs.

Technical Specifications